Storm-Tite Long

Storm-Tite®Long for  your insulated sheeting..E.g Insulated Sheeting

  • Available in a variety of points Timber, Steel and Dual point , series 500
  • Up to 350mm in length
  • Available in all the popular colours
  • Coated in Australia to AS3566 Class 4
  • One piece assembly with a 25mm metal flange
  • EPDM domed washer comes with a twenty year warranty, black and grey
  • Black EPDM washer for the darker coloured  heads and a light grey washer for lighter colours
  • No shank protection required

 

Download Storm-Tite Long Brochure here

 

Storm-Tite Long Steel Drilling

Storm-Tite Long Screw

 

 

  • Storm-Tite is suitable for most profiles
  • Suitable for fixing on crest or valley into steel battens or pulins up to 3mm thick (or 6mm mild steel)
  • Drill speed 2000 rpm plus
Code Point Gauge TPI Length Finish Box QTY
C1410100S4Z Steel Drillers 14 10 100mm Class 4 300
C1420125S4Z Steel Drillers 14 20 125mmm Class 4 250
C1420150S4Z Steel Drillers 14 20 150mm Class 4 250
C1420175S4Z Steel Drillers 14 20 175mm Class 4 200
C1420215S4Z Steel Drillers 14 20 215mm Class 4 200
C1420250S4Z Steel Drillers 14 20 250mm Class 4 150
C1420300S4Z Steel Drillers 14 20 300mm Class 4 150

 

Storm-Tite Long for Timber Drilling

  • Unique ‘Flat Head’ to minimise corrosion in high risk areas
  • Featuring a EPDM washer that provides a non leaking seal between washer and roofing profile
  • Storm-Tite is suitable for most roofing profiles
  • Can be used on crest or valley into timber battens or purlins/rafters
  • Suitable for hard and softwood
  • Drill Speed variable
  • Use 3/8″ or 10mm hex Driver
Code Point Gauge TPI Length Finish Box QTY
C1410100T4Z Timber 14 10 100mm Class 4 300
C1410125T4Z Timber 14 10 125mm Class 4 250
C1410135T4Z Timber 14 10 135mm Class 4 250
C1410150T4Z Timber 14 10 150mm Class 4 250
C1410200T4Z Timber 14 10 200mm Class 4 150
C1410250T4Z Timber 14 10 250mm Class 4 150
C1410300T4Z Timber 14 10 300mm Class 4 150
C1410350T4Z Timber 14 10 350mm Class 4 TBA
             

 

Storm-Tite Dual Points  For Steel & Timber Drilling up to 2mm.  (Can be used in thicker steel if pre-drilled)

Code Point Gauge TPI Length Finish Box QTY
C1414125D4Z Dual 14 14 125mm Class 4 250
C1414150D4Z Dual 14 14 150mm Class 4 250
C1410160D4Z Dual 14 10 160mm Class 4 250
C1414175D4Z Dual 14 14 175mm Class 4 200
C1414200D4Z Dual 14 14 200mm Class 4 200

 

Storm-Tite Series 500 Steel Drilling

  • Non-leaking screw with it unique domed washer that molds to the profile
  • Suitable for fixing most roofing profiles on crest or valley
  • Into steel battens or purlins up to 12mm thick
  • Recommended drill speed 2000 rpm plus
Code Point Gauge TPI Length Finish Box Qty
C1420125K4Z K5 14 20 125mm Class 4 250
C1420150K4Z K5 14 20 150mm Class 4 250
C1420200k4Z K5 14 20 200mm Class 4 200
C1420225k4Z K5 14 20 225mm Class 4 200

 Storm-Tite’s complete range of sizes click here

Which is the best drill speed to use?

 Action Fasteners Pty Ltd takes pride in inventing, designing and manufacturing the Storm-Tite range of roofing screws here in Australia especially for Australian conditions.
The protective coating complies with AS3566 Class 4 and is deposited with great care to match the life of the ColourBond® sheeting.
Installation using an impact/hammer drill action will cause damage to the coating and void any/all warranties on service life.